If the goods are not reinforced properly in the course of transportation, it may cause the loss of goods and even affect the safety of train operation. Therefore, it is extremely necessary to place and reinforce the goods correctly. Today, Yingcheng Xiaobian will introduce to you how to reinforce the goods in the process of international railway transportation, hoping to help you.

1. When conditions permit, the tie point where the wire or wire rope is tied to the goods shall be at the same height of the center of gravity of the goods.

2. The shape of wire drawing should be octagonal, inverted octagonal, cross-binding or downward-pressing binding.

3. When loading goods, 4 strands of 8 wire are used in front of the goods at the entrance of the box to connect the left and right reinforcement rings of the box wall with "X" reinforcement, and to ensure that the wire is close to the goods.

4. When loading heavy and lightweight goods or trucks, reinforcement should be carried out according to shape, weight and position of center of gravity. After unloading, each sub-unloading station is tidied up or strengthened to ensure safety.

5. When loading goods, the consignor shall provide relevant information on loading and strengthening of the goods according to the requirements of the dispatch station. According to the types, weight, height of the center of gravity and characteristics of the shape and structure of the goods, the reinforcement method shall be determined and the reinforcement materials shall be selected in accordance with the provisions of the table below.

6. The angle between the bundled wire (or wire rope) and its projection on the container floor should generally be close to 45 degrees. If the tied wire or wire rope is mainly used to prevent the horizontal movement of goods, its angle should be appropriately reduced; if it is mainly used to prevent the overturning of goods, its angle should be appropriately increased.

Above is the reinforcement method of goods brought by Yingcheng Xiaobian of International Railway Transport for you in the process of international railway transport. If you have the demand of international railway transport, you may try the above reinforcement method.